OPERATION
CONTROL PANEL
8
1�
ON/OFF Button
3�
Fan Speed Button
5�
Mode Selection Button
7�
Timer Button
Before operating this appliance ensure that the location, installation and condensation
requirementshavebeenmet,refertoinstallationinstructionsstartingonpage19fordetails.
IMPORTANT
Forthebestcoolingresultsensurethatthefiltersareclean,referpage17fordetails.
Whentheapplianceispluggedandthepowerpointisturnedonasinglebeepwillbeheardand
thecoolairoutletlouvrewillcycleopenandclosedonce,thisisnormal.
BASIC OPERATION
There are four basic operational modes available, these are AUTO, COOL (chilled air operation), DRY (chilled and
dehumidified operation) and FAN (fan only operation).
BASIC OPERATION CONTROL PANEL
AUTO
1�
Press the ON/OFF button (1).
2�
Press the mode selection button (5) until the AUTO mode indicator is illuminated.
The table below describes the relationship between room temperature and modes of operation when set to Auto.
RoomTemperature
≥ 24°C
< 24°C
3�
Use fan speed button (3) to select the desired fan speed (AUTO, LOW, MED or HIGH).
4�
Press the ON/OFF button (1) to stop operation.
Rinnai
7
6
5
SetTemperature
24°C
24°C
TEMP� Indicator
4
2�
Filter Reset Button
4�
Temperature Button
6�
Sleep Mode Button
8�
Swing Button
Operation Mode
COOL Mode
FAN mode
12
3
2
1
Portable Room AC OIM