Save A Service Call; When To Call For Service - Rinnai RPC41WA Operation Manual

CARE & MAINTENANCE

SAVE A SERVICE CALL

SYMPTOM
Appliance will not operate.
Power to Appliance but it will not start.
The air conditioner does not generate
enough cool air.
Too noisy or vibrating.
Splashing sound.

WHEN TO CALL FOR SERVICE

SYMPTOM
There is a burning smell and a
strange sound coming from the
unit.
When operated if a circuit breaker
(safety, ground) is thrown or a fuse
is blown.
Rinnai
POSSIBLE CAUSES
Not plugged into power.
Power switch OFF.
Timer Function set.
After switching off
appliance there may be a 3
minute delay before it may
be re-started.
Room temperature is lower
than the set temperature.
P1 appears on the display.
The air intake filters are
blocked
The set temperature is too
high.
Drafts from open windows
and doors.
Other heat sources in the
room.
Cooling space too big.
Operating surface not level
High level of condensate
being generated.
CAUSE
Turn off the air conditioner, and contact Rinnai.
10
POSSIBLE SOLUTIONS
Plug into power.
Switch power ON.
Wait or reset timer function.
the Wait 3 minutes.
Adjust the set temperature
to be lower than the room
temperature.
Drain the water from the
drain outlets.
Clean air filters.
Adjust the set temperature to
a lower temperature.
Close windows and doors
in the area you want to be
cooled.
Remove or turn off heat
sources.
Operate the appliance within
the required cooling capacity.
Move the appliance to level a
operating surface.
This is normal. This appliance
has a pump that evaporates
some condensate through
the exhaust duct.
Portable Room AC OIM