Advertisement
Using a CD to upgrade an S8100's software from R10 or later
Upgrade steps
Step
SAT – Verify that no major or minor alarms
50
are present.
51
SAT – Verify outgoing alarm reports link to
INADS.
SAT – Save translations.
52
53
SAT – Log out of SAT, and exit LAC.
BS – Verify Intuity alarms.
54
BS – Verify GAM alarms.
55
BS – Close the bash windows.
56
LT-IE – Backup the translations and other
57
data to the PCMCIA card or to a network
location.
58
Close Internet Explorer on the S8100's
desktop and on the laptop.
!
SECURITY ALERT:
When you are finished with the upgrade procedures, you should restore your laptop to its original
configuration, including unsharing the CD drive. When connected to a network, a shared drive is a
potential security risk.
12
Details
Type display alarms.
Type test inads-link.
Type save trans.
a
Type logoff, and respond with y to close the SAT
session.
b
Type bash to go to the bash shell.
Type logsend -tTST.
Type wrntevent GAM 0 9991.
Note: This causes a Major GAM alarm. After the system
has called out, enter cleargamalarm all at the BASH
prompt to retire the alarm. This alarm also generates a
Maestro case that the INADS group will need to close.
Type exit to close the bash window.
a
Type exit to close the LAC window.
b
a
Click 'Administer System'.
b
Click 'Backup & Restore' under System
Maintenance.
c
Click 'Immediate Backup'.
d
Under "Choose Items for Immediate Backup,"
select everything that is installed.
e
Set Destination to PCMCIA, or click 'Other
Location' to backup to a network location.
f
Click the Backup button.
Note: If the medium you are backing up to runs out of
space, a message will appear noting the files that didn't get
backed up.
Upgrade Job Aids for S8100
November 2003
Advertisement
