Advertisement
Step
BS – After the shutdown finishes, restart
37
every application.
38
BS – Monitor the startup's progress.
39
Verify that call processing comes into
service.
40
Verify that voice messaging comes into
service.
BS – Telnet into the LAC window from the
41
bash.
42
LAC – Open a SAT window.
SAT – Verify that there is no translation
43
corruption.
SAT – Verify that no major or minor
44
alarms are present.
45
SAT – Verify outgoing alarm reports link
to INADS.
SAT – Verify no-license/emergency
46
numbers.
SAT – Save translations.
47
SAT – Logoff SAT and exit LAC.
48
49
BS – Verify Intuity alarms.
BS – Verify GAM alarms.
50
51
BS – Close the bash windows.
Upgrade Job Aids for S8100
November 2003
Replacing an S8100 Media Server to upgrade its software from R9.5
Execute start all.
Execute statapp.
Execute telnet 127.1 and logon using lucent3.
Type multivantage to open a SAT window. (The terminal
type is W2KTT.)
If there are corrupted translations, a message will appear
when the SAT window opens.
Run display alarms.
Run test inads-link.
Type change system-parameters features.
See ''Administer No-License/Emergency Numbers''
Installation and Upgrades for the Avaya S8100 Media Server with
the Avaya G600 and the Avaya CMC1 Media Gateways,
555-233-146.
Run save trans.
Type logoff and respond with y to close the SAT
a
session.
b
Type bash to go to the bash shell.
Type logsend -tTST.
Type wrntevent GAM 0 9991.
Note: This causes a Major GAM alarm. After the system has
called out, enter cleargamalarm all at the BASH prompt
to retire the alarm. This alarm also generates a Maestro case
that the INADS group will need to close.
a
Type exit to close the bash window.
b
Type exit to close the LAC window.
Upgrade steps
Details
in
25
Advertisement
