Advertisement
Replacing an S8100 Media Server's hard drive
Upgrade steps
Step
BS – Shutdown every application.
35
36
BS – After the shutdown finishes, restart every
application.
BS – Monitor the startup's progress.
37
38
Verify that call processing comes into service.
39
Verify that voice messaging comes into service.
BS – Telnet into the LAC window from the
40
bash.
LAC – Open a SAT window.
41
42
SAT – Verify that there is no translation
corruption.
SAT – Verify that no major or minor alarms are
43
present.
44
SAT – Verify outgoing alarm reports link to
INADS.
SAT – Verify no-license/emergency numbers.
45
SAT – Save translations.
46
SAT – Logoff SAT and exit LAC.
47
48
BS – Verify Intuity alarms.
BS – Verify GAM alarms.
49
50
BS – Close the bash windows.
18
Details
Execute shutdown all.
Execute start all.
Execute statapp.
Execute telnet 127.1 and logon using lucent3.
Type multivantage to open a SAT window. (The
terminal type is W2KTT.)
If there are corrupted translations, a message will appear
when the SAT window opens.
Run display alarms.
Run test inads-link.
Type change system-parameters features.
See ''Administer No-License/Emergency Numbers'' in
Installation and Upgrades for the Avaya S8100 Media
Server with the Avaya G600 and the Avaya CMC1 Media
Gateways, 555-233-146.
Run save trans.
Type logoff and respond with y to close the SAT
a
session.
Type bash to go to the bash shell.
b
Type logsend -tTST.
Type wrntevent GAM 0 9991.
Note: This causes a Major GAM alarm. After the system
has called out, enter cleargamalarm all at the BASH
prompt to retire the alarm. This alarm also generates a
Maestro case that the INADS group will need to close.
a
Type exit to close the bash window.
b
Type exit to close the LAC window.
Upgrade Job Aids for S8100
November 2003
Advertisement
