Advertisement
Replacing an S8100 Media Server to upgrade its software from R9.5
Upgrade steps
Step
BS – Administer the customer's parameters
27
that you wrote down in
setip command.
28
BS – Administer the product ID and OSS
parameters using the 'productid' and 'oss'
commands.
29
BS – Telnet into the LAC window from the
bash.
LAC – Install the new license and password
30
file from the LAC window using the
lucent3 login.
31
LAC – Exit the LAC window and bash
shell.
SDT – Open Internet Explorer on the
32
S8100's desktop and login.
SDT-IE – Restore the translations and other
33
backed-up data to the hard drive.
Note: The Windows logins of vm, sa,
browse, and NTadmin are reset to their
factory defaults. The customer should reset
these passwords and reinstall other
Windows accounts they may have created.
SDT-IE – When the restore finishes, close
34
Internet Explorer.
SDT – Open a bash shell.
35
36
BS – Shutdown every application.
24
setip name=<args>
Step
6, using the
setip cust=<args>
setip dns=<args>
setip wins=<args>
setip ras=<args>
Replace each "<args>" with the corresponding parameter you
recorded in
productid multivantage-product-id <arg>
productid audix-product-id <arg>
oss <telno> <retries> <retry_interval>
Replace each "<arg>" with the corresponding parameter you
recorded from
<telno>, <retries>, and <retry_interval> parameters
separated by spaces; do not enter commas.
Execute telnet 127.1 and login using lucent3.
For details, see Chapter 3 in Installation and Upgrades for the
Avaya S8100 Media Server with the Avaya G600 and the
Avaya CMC1 Media Gateways, 555-233-146.
a
b
a
b
c
d
a
b
c
d
e
f
Note: If you backed up AUDIX announcements in
you must do two restores. After the first restore, repeat the
steps above using the location of the backed up AUDIX
announcements for the Source in
Click Start → Run → bash.
Execute shutdown all.
Details
Step
6.
15. For the oss command, enter the
Step
Type exit, and close the telnet window.
Type exit to close the bash window.
Double-click the IE icon on the S8100's desktop.
Click 'Administer System'.
Log in using lucent3.
Click Continue on the Notice page.
Click 'Administer System.'
Click 'Backup & Restore.'
Click 'Restore.'
Select the Source for the restore – The Destination or
Other location you entered for the backup in
Click the Continue button. Under "These items will
be restored from ... ", every item that was backed up to
the location specified in
Step d
Click the Restore button.
Step
Upgrade Job Aids for S8100
Step
12.
will be selected.
Step
12,
d.
November 2003
Advertisement
