Advertisement
Step
SDT – If the S8100 system is running
18
Windows 2000 with Service Pack 2 or 3, you
need to upgrade to Service Pack 4 (SP4). You
can obtain the SP4 upgrade from either the:
•
Avaya software CD-ROM
•
Microsoft website
19
If you upgraded to SP4 in
restarted Windows 2000, you will need to
repeat
Step 4
and
Step 5
S8100's Windows desktop.
20
SDT – Open a bash shell window.
BS – Shutdown every application.
21
BS – Close the bash window.
22
23
!
WARNING:
Execute this step from the S8100's
Windows desktop, not from the
laptop's desktop. Running setup on the
laptop will overwrite the contents of the
laptop's hard drive.
SDT – Upgrade the S8100's system software.
24
SDT – After the upgrade finishes, if the bash
shell is still open, the platform should reboot
on its own. If the bash shell is not open, open
it and execute reboot nice to restart the
system.
25
Wait approximately 5 minutes then reconnect
to the S8100's desktop.
Upgrade Job Aids for S8100
November 2003
Using a CD to upgrade an S8100's software from R10 or later
a
Upgrade to SP4:
b
c
d
e
Step
18, and
to get back to the
On the S8100's desktop, click Start → Run → bash.
From the bash shell, execute shutdown all.
Type exit.
Browse the contents of the CD-ROM (which you
connected to in
setup.exe, and follow the Wizard's steps for the upgrade.
Repeat steps 4 through 5.
Details
Check the Windows service pack's version:
— On the S8100's Windows desktop,
right-click the My Computer icon.
— Click Properties and check the service
pack's version.
— If running SP4, skip to
either SP2 or SP3, continue with this step to
upgrade to SP4.
From the bash shell, execute shutdown all.
Browse the contents of the CD-ROM (which you
connected to in
Step
17). In the folder, "Windows
Updates," find the SP4 upgrade file,
W2Ksp4.exe, and double-click it.
When the option for archiving files comes up,
choose "Do not archive files." Accept the other
defaults.
If an option to restart Windows 2000 appears when
the upgrade to SP4 finishes, choose no to decline.
f
From the bash shell do a manual reboot, by
executing start all.
Step
17). Find and double-click
Upgrade steps
Step
23. If running
9
Advertisement
