Advertisement
Using a CD to upgrade an S8100's software from R10 or later
Upgrade steps
Step
SDT – On the S8100's desktop, double-click
26
the time display and set the time, time zone,
date, and Daylight Savings.
SDT – Disable modem compression.
27
SDT – Open a bash shell window.
28
BS – Verify the software's version.
29
30
BS – Verify the customer's parameters that
you wrote down in
command.
BS – Administer the product ID and OSS
31
parameters using the 'productid' and 'oss'
commands.
BS – Open a LAC window.
32
33
LAC – Open a bash shell window.
BS – Check license status.
34
If License-Normal Mode is displayed,
skip
Step
35.
LAC – Install the new license and password
35
file from the LAC window using the lucent3
log-in ID.
10
Step
15, using the setip
Details
The time display is in the tool tray at the lower right of the
desktop.
Click Start → Settings → Control Panel.
a
b
Double-click Phone and Modem Options.
c
Click the Modems tab.
d
Select the installed modem and click Properties.
e
Click the Advanced tab.
f
Click Change the Default Preferences.
g
In the Compression drop-down list, select
Disabled.
h
Close each dialog by clicking OK, and close the
Control Panel window.
Click Start → Run → bash.
Type swversion. Ensure that the Release number and
MultiVantage version number are as expected.
Type setip to display the customer's parameters. If any
parameter is not as you recorded in Step 15, use the
following setip commands to reset those parameters.
setip name=<args>
setip cust=<args>
setip dns=<args>
setip wins=<args>
setip ras=<args>
Replace each "<args>" with the corresponding parameter
you recorded in
Step
15.
productid multivantage-product-id <arg>
productid audix-product-id <arg>
oss <telno> <retries> <retry_interval>
Replace each "<arg>" with the corresponding parameter
you recorded from
Step
15. For the oss command, enter
the <telno>, <retries>, and <retry_interval>
parameters separated by spaces; do not enter commas.
Execute telnet 127.1, and log on using lucent3.
Type bash.
Type statuslicense.
For details, see Chapter 3 in Installation and Upgrades for
the Avaya S8100 Media Server with the Avaya G600 and
the Avaya CMC1 Media Gateways, 555-233-146.
Upgrade Job Aids for S8100
November 2003
Advertisement
