Interface Group; C Ha Pte R 13 Inte Rfa C E G Ro Up; Overview; Interface Group Screen - ZyXEL Communications LTE3301 Series User Manual

13.1 O ve rvie w
By default, the four LAN interfaces on the LTE3301 are in the same group and can communicate with
each other. Creating a new interface will create a new LAN bridge interface (subnet) (for example,
192.168.2.0/24) that acts as a dependent LAN network, and is a different subnet from default LAN
subnet (192.168.1.0/24).
13.2 Inte rfa c e G ro up Sc re e n
You can manually add a LAN/WLAN interface to a new group.
Use the
DHC P
clients in the default and/or user-defined groups. See
Use the
Inte rfa c e G ro up
(subnet). Click
Network > Interface Group
Fig ure 67
The following table describes the fields in this screen.
Table 45 Network > Interface Group
L ABEL
Add
Name
LAN Interface
VID
Modify
screen to configure the private IP addresses the DHCP server on the LTE3301 assigns to the
screen to create a new interface group, which is a new LAN bridge interface
Ne two rk > Inte rfa c e G ro up
DESC RIPT IO N
Click this button to create a new interface group.
This shows the descriptive name of the group.
This shows the interface group.
This shows the VLAN ID number (from 0 to 4094) of the interface group.
Click the icon to remove the user-defined group.
De le te
LTE3301 Series User's Guide
C
HA PTER
Inte rfa c e G ro up
Chapter 9 on page 82
to open the following screen.
101
1 3
for more information.