Management Wan - ZyXEL Communications LTE3301 Series User Manual

IPv6 Ra pid De plo ym e nt
Use IPv6 Rapid Deployment (6rd) when the local network uses IPv6 and the ISP has an IPv4 network.
When the LTE3301 has an IPv4 WAN address, you can enable 6rd to encapsulate IPv6 packets in IPv4
packets to cross the ISP's IPv4 network.
The LTE3301 generates a global IPv6 prefix from its IPv4 WAN address and tunnels IPv6 traffic to the ISP's
Border Relay router (
use IPv4 services. The LTE3301 uses it's configured IPv4 WAN IP to route IPv4 traffic to the IPv4 Internet.
IPv6 Rapid Deployment
Fig ure 28
LAN
- I Pv6
- I Pv4
+ I Pv4
I Pv6
6.4 Ma na g e m e nt WAN
The summary table shows you the WAN connection configured on the LTE3301. Click
Ma na g e m e nt WAN
Network > WAN > Management WAN
Fig ure 29
The following table describes the labels in this screen.
Table 13 Network > WAN > Management WAN
L ABEL
Interface
Type
IP Address
Chapter 6 WAN
in the figure) to connect to the native IPv6 Internet. The local network can also
BR
W AN
- I Pv4
- I Pv6 in I Pv4
I SP ( I Pv4)
I Pv6 in I Pv4
I Pv4
I Pv4 I nt ernet
from the menu.
C o nfig ura tio n
DESC RIPT IO N
This field displays the name of the WAN interface for this connection.
This field displays the type of the WAN connection.
This field displays the IPv4 and IPv6 addresses of the WAN connection.
LTE3301 Series User's Guide
52
BR
I Pv6 I nt ernet
Ne two rk
>
WAN >