Table of Contents
Advertisement
3 December 2004
16. Insert the tray [A] to the table
board [B] as shown.
NOTE: Insert the tray to the
table board till the
holes [C] on both
sides of the tray and
the holes [D] on
both sides of the
table board are
correctly lined.
17. Insert the clips to the holes [D] on both sides of the table board. Then secure
the tray [A] with the table board [B].
NOTE: Put in the tray to the position where you have inserted the clips.
18. Put through the keyboard
cables for the scanner
between the table board [E]
and the tray [F] from the front
side to the back of the tray.
19. Set the keyboard for the scanner on
the tray [G.] Then slide the tray to till
the end.
MAINFRAME AND OPTION INSTALLATION PROCEDURES
[D]
[C]
[E]
[G]
1-9
[D]
[A]
G422I219.WMF
G422I220.WMF
G422I221.WMF
[B]
[F]
Advertisement
Table of Contents
