Table of Contents
Advertisement
3 December 2004
11. Secure the handle [A] to the base board [B]
with the M6×10W screws (! x 2).
12. Set the base board [C]
with the wheels on the
floor. Line the stand
[D] and the cutout of
the base board. Then
slide the base board to
the rack as shown.
Important
Slide the base board [C] to the rack till the holes [E] on the base board and the
screw holes [F] on the rack are correctly lined.
MAINFRAME AND OPTION INSTALLATION PROCEDURES
[C]
[D]
[C]
1-7
[B]
[A]
[F]
[E]
G422I208.WMF
[E]
[F]
[C]
G422I216.WMF
Advertisement
Table of Contents
