Xerox Document WorkCentre 450C User Manual page 72

10. Press RIGHT ARROW to display [charge code] and
ENTER.
11. Enter the charge code. A dollar sign ($) displays for each
number in the charge code. The dollar signs display after
the fax number.
12. When you are done entering the charge code, press
PAUSE. Any additional numbers you might enter will
display on the LCD.
13. Do one of the following:
• Press START to begin the fax transmission.
• Press ENTER, add another fax number, and then press
START.
Note After the fax is sent, you may want to change the
PAUSE key setting to pause only. Repeat steps 1
through 5 and choose pause only in step 5.
Switching from pulse to touch tone
dialing during a dialing sequence
If your phone line uses pulse (rotary) dialing, you can switch
from pulse to touch-tone dialing when sending a fax.
Depending on your telephone system, you may need to use
touch-tone dialing to enter the access number for your long-
distance service.
72