Xerox Document WorkCentre 450C User Manual page 205

205
WorkCentre 450c Safety
and Legal Requirements
Your system and supplies have been designed and tested to
meet strict safety requirements. These include safety
agency examination and approval, and compliance to
established environmental standards. Please read the
following instructions and refer to them as needed to ensure
the continued safe operation of your system.
Follow all warnings and instructions marked on, or
supplied with, the product.
Unplug this system from the wall outlet before cleaning.
Always use materials specifically designated for this
system. Use of other materials may result in poor
performance and could create a hazardous situation.
Do not use this system near water, wet locations, or
outdoors.
Do not place this system on an unstable cart, stand, or table.
The system may fall, causing personal injury or serious
damage to the system.
Connect the system to an earthed mains socket outlet only.
This system is equipped with a 3-wire, grounding-type plug
(i.e., a plug having a third grounding pin). This plug will
only fit into a grounding-type power outlet. This is a safety
feature. To avoid the risk of electric shock, contact your
electrician to replace the receptacle if you are unable to
insert the plug into the outlet. Never use a ground adapter
plug to connect the system to a power source receptacle that
lacks a ground connection terminal.