Xerox Document WorkCentre 450C User Manual page 114

Using fax forwarding from a remote location
If you're away from your WorkCentre and you didn't set up
fax forwarding, you can set up the feature if security is
enabled on your WorkCentre and you have access to a
touch-tone telephone.
Setting up fax forwarding from a remote location
Use this procedure to set up fax forwarding for the first time
and to specify a new fax number as your location changes.
1. Lift the telephone handset and wait for a dial tone.
2. Dial your WorkCentre's fax number.
After the WorkCentre answers, you hear the fax tones.
3. When you hear a pause in the tone sequence, press #
and wait for three confirmation tones.
4. Press **7#.
5. Press your four-digit security password and #.
6. Press the fax number you want your faxes forwarded to
and ##.
7. Remain on the line until you hear three beeps, which
means the WorkCentre received your request, and then
hang up the telephone.
The WorkCentre deletes the fax after it's sent.
114