Xerox Document WorkCentre 450C User Manual page 38

1. Attach the parallel cable to the parallel port at the rear
of the WorkCentre, securing it with the wire clips, and
then to a free parallel (printer) port on your PC.
2. Attach the power cord to the power connector at the
rear of the WorkCentre.
3. Plug the cord into a grounded electrical outlet.]
Note In the United States and Canada, use a UL listed and
CSA labeled detachable power cord, 3-conductor, 18
AWG, SJT or SVT type, plug grounding type parallel
blade, cord connector body IEC 320 style to connect to the
WorkCentre. Make sure the electrical outlet is near the
WorkCentre and easily accessible. The power cord is used
as the main disconnect device.
Xerox WorkCentre 450c High-Speed Windows Drivers by
Parallel Technologies,
Experts Call Parallel Technologies today for Low-Noise
High-Quality 1284 Printer Cables and DirectParallel PC to
PC Connection Cables. Contact DirectParallel Cable Sales
at (800) 789-4784. Outside the U.S. call (206) 813-8728.
For availability and information, call (206) 869-1119.
Internet Email address: sales@lpt.com
CompuServe email: 71612,3466
Parallel Technologies web site: www.lpt.com/lpt
Inc., the Parallel Technology
38