Xerox Document WorkCentre 450C User Manual page 68

• Press SPEED DIAL and enter the speed dial
number.
7. Press START to begin the fax transmission.
8. If you chose to include a cover page with your fax,
enter the number of pages in the document and then
press ENTER.
To cancel the transmission before the WorkCentre sends
the fax, press the STOP key and then the ENTER key.
Sending a fax to more than one fax
number
You can send the same fax to more than one fax number.
You can use a combination of both direct and speed dialing.
Note If you routinely send faxes to the same group of
fax numbers, you can create a group entry in your
Phonebook. Then you can use the SPEED DIAL key
to send the fax quickly to the group of fax numbers.
1. At the WorkCentre 450c, load up to 20 pages face
down in the document tray.
2. Do one of the following:
• Using the numeric keypad, enter the fax number.
To change the fax number, press the LEFT
ARROW key to move the cursor to the left, press
68