Xerox Document WorkCentre 450C User Manual page 200

Code
E012
E013
E014
E015
E016
Meaning
The WorkCentre received
an illegal disconnect signal
from the remote machine.
There could be a problem
with the remote machine.
The WorkCentre received
an unexpected signal or
illegal command from the
remote machine. There
could be a problem with the
remote machine.
While transmitting, the
WorkCentre received a
Memory Full or Out of
Paper signal. The page
was not completely
received, or a page was
received with an
unacceptable number of
errors. There could be
telephone line noise or line
errors.
The WorkCentre had an
error while transmitting, or
there were mismatched
identification signals
between the two machines.
The WorkCentre received
a confirmation to end retries
from the remote machine
when it tried to end a
retransmission.
Action
Check the WorkCentre with
a known good machine.
Check the WorkCentre with
a known good machine.
Check the remote machine
and the telephone line.
Reduce the transmission
speed and try again.
Check that junk mail is
disabled on the remote
machine (this feature filters
out calls from unknown fax
numbers). Retry the
operation.
No action.
200