Xerox Document WorkCentre 450C User Manual page 190

Message
Memory is full.
Cannot receive.
Memory is full.
Job was canceled.
Memory is full.
Poll was canceled.
Memory is full. Will
retry: MM-DD,
HH:MM am/pm .
Memory is full. Will
try dialing later.
Meaning
There isn't enough
WorkCentre memory to
receive the fax.
There isn't enough
WorkCentre memory to
perform the task.
There isn't enough
memory to retrieve the
document from the other
fax machine.
There isn't enough
WorkCentre memory.
Your fax will be sent at the
specified time.
There isn't enough
WorkCentre memory and
the phone line is not
available. When the
WorkCentre's memory
increases, it will continue
scanning the document and
then redial the number
when the phone line is free.
Action
Increase memory by
deleting or printing the
documents stored to
memory.
Press the key to clear
STOP
the message. Increase
memory by deleting or
printing the documents
stored to memory, and then
try again.
Increase memory by
deleting or printing the
documents stored to
memory, and then try
again.
Increase memory by
deleting or printing the
documents stored to
memory. If you do not want
to wait until the WorkCentre
sends the fax, press
to remove the
CLEAR
document, and try faxing it
again.
Increase memory by
deleting or printing the
documents stored to
memory. Make sure your
telephone line is
connected.
190
EXIT/