Xerox Document WorkCentre 450C User Manual page 71

Note If you frequently send faxes to a fax number that
requires a charge code, you can create an individual
speed dial entry in your Phonebook that includes your
charge code. Using speed dialing, you can quickly
enter both the fax number and charge code with the
press of one key.
1. At the WorkCentre 450c, press the MENU key.
2. Press 5 [Setup] and ENTER.
3. Press 7 [Control panel] and ENTER.
4. Press 4 [Pause key] and ENTER.
5. Press RIGHT ARROW to display [dial options] and
ENTER.
The WorkCentre sounds a confirmation beep.
6. Press STOP to exit the menus.
7. Load up to 20 pages face down in the document tray.
8. Enter the fax number.
Note If you need to add a pause (timed interval) in the
fax number, press PAUSE and then ENTER. A
comma displays for each pause you add.
9. When you need to enter a charge code, press the
PAUSE key to display the dial options menu.
Dial options
pause
71