Xerox Document WorkCentre 450C User Manual page 51

9. Press the START key.
The color print head returns to the home position (far left
side of printer) and the WorkCentre cleans the head. After
a few moments, the printer returns to normal print mode.
If the color print head does not return to the home position,
try removing and reinstalling the head.
Installing a color print head
The WorkCentre displays a graphic in the WorkCentre
450c Status window on your PC and a message on the
control panel LCD when it is time to install a new color
print head. The color print head is the black plastic housing
that contains the color ink cartridges. You can reuse the
same ink cartridges if they still contain ink.
Use the following procedure to replace the color print head.
You can also use the procedure to install a color print head
for the first time, and to reinstall a previously used color
print head when changing from black-and-white to color
printing.
1. At the WorkCentre 450c, press the CARTRIDGE key
three times to display [replace color head] on the LCD.
2. Press ENTER.
The WorkCentre moves the color print head to the
center of the printer so you can you remove it.
51