Xerox Document WorkCentre 450C User Manual page 124

activate the WorkCentre. You need to inform callers
of your pick-up code in your telephone answer
message.
5. Do one of the following:
• Click OK to change the options at the WorkCentre
and close the WorkCentre 450c Settings window.
• Click Apply to change the options at the
WorkCentre and keep the WorkCentre 450c Settings
window open.
Note To use the factory defaults, click the Restore
Defaults button.
Changing the fax in options
1. At your PC, double-click the WorkCentre icon.
2. In the WorkCentre 450c Status window, click Settings.
3. Click the Fax In tab.
4. Change the defaults for any of these options:
Include receive header
Prints the date and time the fax is received, the
number sending the fax, your fax name (if specified)
or your fax number, and the page number at the top
of each page received.
124