Xerox Document WorkCentre 450C User Manual page 43

cartridge. If cleaning the head or cartridge two or three
times does not improve your print quality, then you should
replace the color print head or high capacity ink jet
cartridge.
1. At the WorkCentre 450c, press the CARTRIDGE key
twice to display [clean] on the LCD.
2. Press ENTER.
A message displays on the LCD while the WorkCentre
is cleaning. When cleaning is complete, you can run a
printer test to check
your print quality.
3. Press the MENU key.
4. Press 6 [Printer] and ENTER.
5. Press 5 [Make test print] and ENTER.
6. Check the test print. If you notice breaks in the ink
coverage, clean the color print head or high capacity
ink jet cartridge again.
Installing a high capacity (black only) ink jet
cartridge
The WorkCentre 450c Status window on your PC includes
an ink level gauge which indicates your ink supply. When
the ink supply runs low, the WorkCentre displays a
43