Xerox Document WorkCentre 450C User Manual page 65

ARROW key to move the cursor to the left, press
the RIGHT ARROW key to move the cursor to the
right, and press the EXIT/CLEAR key to delete a
highlighted number.
• Press SPEED DIAL and enter the speed dial
number.
Note Depending on your phone system, you may
need to enter a prefix (for example, 8 or 9) and press
the PAUSE key to add a timed interval before entering
the fax number.
3. Press START.
The WorkCentre dials the fax number, sends the fax, and
sounds a confirmation beep when the transmission is
complete. By default, the WorkCentre prints a report if the
fax could not be sent.
To cancel the transmission before the WorkCentre sends
the fax, press the STOP key and then the ENTER key.
Changing fax settings before
sending a fax
Before sending a fax, you can change the contrast and
resolution of your document. You can also choose to
include the cover page the WorkCentre provides, and print
a confirmation report after the fax is sent.
65