Xerox Document WorkCentre 450C User Manual page 66

You change fax settings using the keys on the WorkCentre
control panel. The settings you change affect the fax you
are sending. After the fax is sent, the WorkCentre returns to
its default settings.
Note At any time before sending the fax, you can
press the EXIT/CLEAR key to remove the document
from the WorkCentre.
1. At the WorkCentre, load up to 20 pages face down in
the document tray.
2. To include a cover page with the fax, press the
COVER PAGE key to display [yes] and then press
ENTER.
3. To print a confirmation report after the fax is sent,
press the CONFIRM key to display [yes] and then
press ENTER.
4. Press the CONTRAST key several times to switch
among these options:
Normal
Lighten
Darken
Photo normal For photographs and documents that contain
Photo lighten For photographs and grayscale documents
For documents with good dark and light values.
For documents that are too dark.
For documents that are too light.
different shades of gray.
that are too dark.
66