Specifying Network Security Level - Ricoh Aficio MP161F Operating Instructions Manual

Enhanced Network Security

Specifying Network Security Level

This can be specified by the network administrator.
This setting lets you change the security level to limit unauthorized access.
Set the security level to [Level 0], [Level 1], or [Level 2].
Select [Level 2] for maximum security to protect confidential information.
Select [Level 1] for moderate security. Use this setting if the machine is connected
to the office local area network (LAN).
Select [Level 0] to use this setting if no information needs to be protected.
You can use the control panel to select the security level for the entire network.
If you change this setting using Web Image Monitor, the network security level
settings other than the specified one will be reset to the default.
Reference
For details about logging on and logging off with user authentication, see p.25
5
"Logging on Using Administrator Authentication", p.26 "Logging off Using
Administrator Authentication".
A
Press the {User Tools/Counter}key.
B
Select [System Settings] using {U} or {T}, and then press the {OK} key.
C
Select [Administrator Tools] using {U} or {T}, and then press the {OK} key.
D
Select [Network Security Level] using {U} or {T}, and then press the {OK} key.
104