Access The Setup Screens - Crestron TSW-560 Supplemental Manual

TSW-560/TSW-760/TSW-1060:
5", 7", and 10.1" Touch Screens

Access the Setup Screens

The setup screens enable basic configuration prior to regular operation of the Crestron
TSW-560, TSW-760, and TSW-1060 touch screens. To display the main setup screen,
touch the display while applying power to the touch screen.
The Crestron TSW-560, TSW-760, and TSW-1060 are functionally similar. For simplicity
within this guide, the term "touch screen" is used except where noted.
NOTE:
screen defaults to the main setup screen.
During regular operation of the touch screen, there are three ways to access the setup
functions:
1. Place a button on the project main page, and assign the reserved join number
2. Tap the hard keys labeled below as 1, 2, 3, and 4 in sequence twice
3. Place five fingers on the display and hold for 15 seconds.
Supplemental Guide – DOC. 7927A
If no project has been loaded or if an invalid project has been loaded, the touch
(17242) that activates setup.
(tap 1, 2, 3, 4, 1, 2, 3, 4) with a 5-second period.
Touch Screen Hard Key Assignment
TSW-560/TSW-760/TSW-1060: 5", 7", and 10.1" Touch Screens • 1
®