Table of Contents
Advertisement
Crestron TST-600
5.7" Wireless Touch Screen:
TST-600
Access the Setup Screens
Via the Trigger Keys
Via Front Panel Buttons
Via Crestron Toolbox
Configuration Guide – DOC. 7383D
The main menu is the starting point for configuring the TST-600 from Crestron
NOTE: If no project has been loaded or if an invalid project has been loaded, the
TST-600 defaults to the main menu.
The setup screens enable basic configuration procedures prior to regular operation of
the TST-600.
If a project is running, the main menu can be accessed using one of three methods:
via the trigger keys on the top of the touch screen, via front panel buttons on the left
side of the touch screen or via Crestron Toolbox™.
1.
Press and hold the left trigger key on the top of the touch screen until the
unit resets (approximately 5 seconds).
2.
When the display turns black, then displays a "3", release the trigger key.
3.
When "Loading Crestron Applications..." appears on the display, touch the
screen.
4.
Release the touch screen when "Preparing to enter setup" appears.
The main menu can also be accessed by pressing HOME, MEDIA, ▲ and ▼, on
the left side of the touch screen display, in sequence twice (press HOME, MEDIA,
▲, ▼, HOME, MEDIA, ▲, ▼) within a 5 second period.
1.
Establish communication with the touch screen.
2.
Right-click on the device and select Functions | Setup Mode....
3.
Select Enter Setup Mode. The main menu is displayed, as shown in the
illustration below.
NOTE: Select Exit Setup Mode to exit the setup menu.
5.7" Wireless Touch Screen
5.7" Wireless Touch Screen: TST-600 • 1
®
.
Hide quick links:
Advertisement
Table of Contents
