Control System
Click Control System to configure a connection to a Crestron control system.
Settings Tab - Control System
Encrypt Connection: Toggle the switch to turn on or off an encrypted connection
•
to the control system.
Control System Username: If Encrypt Connection is enabled, enter a username
•
for the encrypted connection.
Control System Password: If Encrypt Connection is enabled, enter a password
•
for the encrypted connection.
Confirm Password: Reenter the password set for Control System Password.
•
Room ID: Enter a control system room ID to associate with the touch screen (for
•
connections with the Crestron Virtual Control server-based control system)
NOTE:
Control, refer to the help file in the Crestron Virtual Control web configuration
interface. To access the help file, click the question mark button
left of the page.
IP ID: Enter an IP ID for connecting the touch screen to the control system.
•
IP Address/Hostname: Enter the control system IP address or hostname.
•
52 • TSW-560/TSW-760/TSW-1060: Touch Screens
For more information on connecting the touch screen to Crestron Virtual
on the top
Supplemental Guide – DOC. 7927G