Rava Test - Crestron TSW-560 Supplemental Manual

Rava Test

Tap Rava Test on the Diagnostics & Advanced screen to display the Rava Diagnostics
screen.
Rava Diagnostics Screen
Use the Rava Diagnostics screen to test using the Rava SIP Intercom with the touch
screen. This screen may be used to call another touch screen that has a Rava SIP
intercom, to test and configure projects, and to adjust various Rava settings.
To place a call to another touch screen with a Rava SIP intercom, enter the
•
extension of the touch screen using the numeric keypad, and then tap Call.
NOTE:
with the project. If the intercom does not function, there is an issue with the
intercom settings.
Use the buttons on the left and right of the screen to view or control various call
•
settings.
Tap Rava Setup to display the Rava Settings screen.
Supplemental Guide – DOC. 7927G
If the intercom functions but the Rava project does not, there is an issue
TSW-560/TSW-760/TSW-1060: Touch Screens• 23