Avaya MCC1 Maintenance Procedures page 327

Configuring the NIC
1 Under Server, click Configure Server
2 Click Continue through the review notices until you get to the xxx page.
3 Select Configure Individual Services and click Continue.
4 Select Set Identities and click Continue.
5 The following Ethernet ports are listed:
•
•
•
•
Using the drop-down menu, set the Corporate LAN field to Ethernet 2 to have the IPSI control
6
on a dedicated, separate Ethernet port.
7 Click Continue.
8 Fill in the following information for Ethernet 2:
•
•
•
•
9 Select "VLAN 802.1q priority tagging is enabled" if true.
10 Click Change. The status of the configuration update appears in the window.
When the update completes, the following message appears:
ethernet interfaces
Testing connectivity to customer's network
1 Under Diagnostics click Ping.
The Ping screen displays
Maintenance Procedures
December 2003
Control Network A: [default: Ethernet 0]
Services Port: [default: Ethernet 1]
Corporate LAN: [default: Ethernet 0]
Unused
IP address
Gateway
Subnet mask
Speed
.
(Figure 101, Ping screen,
Successfully configured
on page 328).
327