Avaya MCC1 Maintenance Procedures page 314

Powering up the Media Server
Complete the following steps if you want to start the server at this time:
1 Plug the power cord in the back of the server.
2 Press the Power Button located on the front on the right hand side.
3 Log into the server to ensure that the startup is complete.
Restoring the RSA configuration
Complete the following steps to restore the RSA configuration information:
1 Connect the services laptop to the Ethernet port on the RSA using a crossover cable.
2 Open a browser window.
3 Type 192.11.13.6 in the address field of the browser, and press Enter.
The Enter Network Password window appears.
4 In the Enter Network Password window, enter the default login of craft and default password of
passw0rd (with a zero).
5 In the RSA welcome screen, select the no timeout value from the drop-down list (see
RSA Welcome screen,
disconnecting.
Figure 93: RSA Welcome screen
6 Click Continue.
7 Click Configuration File in the navigation pane.
314
on page 314). The no timeout value allows 60 minutes of use before
Figure 93,
Maintenance Procedures
December 2003