Table of Contents
Advertisement
Installation
Diagnostic tool installation
Software Installation
The PIC controller is associated with a PC-based diagnostic tool. This
diagnostic runs on Windows 2000 and Windows XP SP2.
The PIC is connected to the PC via a PC USB port.
The diagnostic tool installation software is available upon request to the IT
group in your local Trane Sales Office.
CAUTION!: Before starting software installation, DO NOT CONNECT the PIC
to the PC. Software drivers must be installed prior to the first PIC
connection.
Step 0: Check if the diagnostic tool is already installed.
From the 'Start' menu, 'All programs', check if the 'PIC Diag Tool' icon is
located in the 'PIC Diag' program group. If the icon is present, the
diagnostic tool is already installed.
Step 1: Run the diagnostic tool installation wizard (setup.exe)
Step 2: Ensure the PIC is not connected to the PC
Click on 'Next'
18
BAS-SVX08D-E4
Hide quick links:
Advertisement
Table of Contents
