Symbio Service And Installation Mobile Application; Download Mobile App; Connecting To The Symbio 700; Required Tools - Trane Symbio 700 User Manual

Symbio Service and Installation Mobile Application

The Symbio Service and Installation mobile app provides advanced configuration, setup, status
updates, alarms, and service capabilities for the Symbio 700 controller via Bluetooth connection.
The Symbio 700 can connect to mobile devices that support BLE version 4.2 and higher. Only one
connection is allowed at a time to prevent another user from connecting to the system while it is already
in use. If a connection is lost, whether accidental or purposeful, a timer is used to prevent the controller
from being locked by a user that does not disconnect the controller in a preferred manner.
The Symbio Installation and Service tool is required to view and edit the following:
•
•
•
•
•
For more detailed information on the Symbio Service and Installation Mobile Application, refer to the
Quick Start Guide for Symbio Service and Installation - BAS-SVN043*-EN.

Download Mobile App

To download the Symbio Service & Installation mobile app:
1. Access the Apple App Store or Google Play store by scanning the QR code below or clicking one of
2. Navigate to the Apple App Store or Google Play Store on your mobile device.
3. Search for Trane Symbio to locate the Symbio Service & Installation app.
4. Download and install the app.
Figure 1. Symbio Service & Installation app

Connecting to the Symbio 700

Required Tools

•
•
BAS-SVU054B-EN
Equipment configuration
Historical alarms
Firmware updates
Backup and restore
Building Automation System configuration
the download links.
• Apple download link
• Google Play (Android) download link
5/16 inch nut driver tool for panel removal
Smart devices supported:
– iPhone®
– Android™
7