Table of Contents
Advertisement
Introduction
This section gives an overview of the Extron DTP2 R 212 and DTP2 R 212 SA switching
receivers. Topics include:
•
•
•
•
About this Guide
This guide describes the DTP2 R 212 and DTP2 R 212 SA two‑input switching receivers
and provides instructions on how to install, configure, and operate them. The DTP2 R 212
switches and extends signals up to 330 feet (100 meters).
Details regarding configurating and operating the receivers through the Extron Product
Configuration Software (PCS) can be found in the DTP2 R 212 PCS Help File available after
you've opened up PCS (see
In this guide, the DTP2 R 212 and DTP2 R 212 SA are commonly referred to as "receiver",
"switcher", "switching receiver", or simply as DTP2 R 212.
About the DTP2 R 212
The Extron DTP2 R 212 is a two‑input switcher for 4K video signals with two simultaneous
outputs. The switching receiver features one HDMI and one DTP2 input, and one local
HDMI output. The device also features EDID Minder for managing EDID, and Key Minder for
managing HDCP outputs.
The DTP2 R 212 can also extract embedded HDMI two‑channel PCM audio to a stereo
captive screw output or an optional stereo amplifier output (DTP2 R 212 SA).
•
•
The switcher is housed in a one‑inch high, three‑quarter rack wide, rack‑mountable metal
enclosure, and is powered by an external power supply.
About this Guide
About the DTP2 R 212
Features
Application Diagrams
PCS Device Menu
The DTP2 R 212 receives the digital signal from Legacy DTP inputs up to 330 feet
(100 meters) with a maximum resolution of up to 4K @ 60 Hz, 4:2:0, with HDCP 1.4,
supporting data rates up to 10.2 Gbps.
The DTP2 R 212 receives the digital signal from DTP2 inputs up to 330 feet
(100 meters) with a maximum resolution of up to 4K @ 60 Hz, 4:4:4, with HDCP 2.3,
supporting data rates up to 18 Gbps.
on page 27).
DTP2 R 212 Series • Introduction
1
Advertisement
Table of Contents
