Sample Configuration - Siemens SINAMICS S120 Installation And Start-Up Manual

3.2

Sample configuration

Overview
Note
The co
illustrated in the diagram below) in a SINAMICS S120 drive line-up for:
- One infeed
- Two d
For a more detailed description of this configuration, see the section "Initial commissioning
usin
This In
s ervo as an example" to include a description of the initial commissioning procedure for the
CANopen communication interface with the CBC10 Communication Board.
The following diagram illustrates the drive objects. From the point of view of CANopen and
w h this arrangement: it
• Single Motor Module 1 is the first SINAMICS drive object
• Single Motor Module 2
Figure 3-1
CANopen interface
Commissioning Manual, 12.2004 Edition, 6SL3097-2AA00-0BP1
mmissioning p rocedure described here is b
(Active Line Module)
rive s (Single Motor Module)
g servo as an example" in the Installation and Sta
stalla tion and Start-Up Manual extends the description of "Initial commission
is the second SINAMICS drive object
Components (example)
3.2 Sample configuration
ased on the sam ple configuration (as
rt-Up Manual SINAMICS S120 /IH1/.
Commissioning
ing using
3-3