Led Definitions - Wasp Duraline WLS 8400 ER Series Product Reference Manual

Table 2-1. Standard Beeper Definitions (Continued)
Beeper Sequence
RS-232 only
1 short high beep

LED Definitions

In addition to beeper sequences, the scanner uses the two-color LED to indicate its status.
Table 2-2 defines LED colors that display during scanning.
LED
Off
Green
Red
A <BEL> character is received and Beep on <BEL> is enabled.
Table 2-2. Standard LED Definitions
The scanner is on and ready to scan, or no power is applied to the
scanner.
A bar code was successfully decoded.
A data transmission error occurred.
Indication
Indication
Scanning 2-5