Set Lengths For Code 11 - Wasp Duraline WLS 8400 ER Series Product Reference Manual

Set Lengths for Code 11 (continued)
Two Discrete Lengths - This option allows the scanner to decode only those Code 11
symbols containing either of two selected lengths. Lengths are selected from the numeric
bar codes beginning on page
decode only those Code 11 symbols containing either 2 or 14 characters, select Code 11 -
Two Discrete Lengths, then scan 0, 2, 1, and then 4. In case of an error, or to change
the selection, scan Cancel on page D-7.
Length Within Range - This option allows the scanner to decode a Code 11 symbol
with a specific length range. The length range is selected from numeric bar codes
beginning on page D-1
11 symbols containing between 4 and 12 characters, first scan Code 11 - Length Within
Range. Then scan 0, 4, 1, and 2 (single digit numbers must always be preceded by a leading
zero). In case of an error, or to change the selection, scan Cancel on page D-7.
Any Length - This option allows the scanner to decode Code 11 symbols containing any
number of characters within the scanner capability.
D-1 in Chapter D, Numeric Bar
Code 11 - Two Discrete Lengths
in Chapter D, Numeric Bar Codes.
Code 11 - Length Within Range
Code 11 - Any Length
Symbologies
Codes. For example, to
For example, to decode Code
8-35