Move Cursor - Wasp Duraline WLS 8400 ER Series Product Reference Manual

Move Cursor

Scan a bar code below to move the cursor in relation to a specified character. Then enter a
character by scanning a bar code from the
107.
If there is no match when the rule is interpreted and the rule fails, the
next rule is checked.
Move Cursor To Character
Move Cursor Past Character
Send Pause
Scan the bar code below to insert a pause in the transmission of data. The length of this
pause is controlled by the value of the Pause Duration parameter.
Alphanumeric Keyboard
Move Cursor To Start
Send Pause
Advanced Data Formatting
beginning on page 10-
10-33