Interface; Introduction - Wasp Duraline WLS 8400 ER Series Product Reference Manual

Introduction

This chapter provides RS-232 host information for setting up the scanner. The RS-232
interface is used to attach the scanner to point-of-sale devices, host computers, or other
devices with an available RS-232 port (i.e., com port).
If the particular host is not listed in
the host device. To set communication parameters for hosts not listed, refer to the
documentation for the host device.
This scanner utilizes TTL RS-232 signal levels, which interfaces with
most system architectures. Please contact Wasp Support for more
information.
Throughout the programming bar code menus, default values are indicated with asterisks
*
( ).
*
Indicates Default
Table 6-2, set the communication parameters to match
*
Baud Rate 9600
RS-232 Interface
Feature/Option
6-3