Usb Keyboard Fn 1 Substitution; Function Key Mapping - Wasp Duraline WLS 8400 ER Series Product Reference Manual

7-14
WLS 8400 Product Reference Guide

USB Keyboard FN 1 Substitution

This option applies only to the USB HID Keyboard Emulation device. When enabled, this
allows replacement of any FN 1 characters in an EAN 128 bar code with a Key Category
and value chosen by the user. See FN1 Substitution Values on page 9-9 to set the Key
Category and Key Value.
Enable USB Keyboard FN 1 Substitution
*Disable USB Keyboard FN 1 Substitution

Function Key Mapping

ASCII values under 32 are normally sent as a control-key sequences (see Table 7-2 on page
7-16). When this parameter is enabled, the keys in bold are sent in place of the standard key
mapping. Table entries that do not have a bold entry remain the same whether or not this
parameter is enabled.
*Disable Function Key Mapping
Enable Function Key Mapping