Ignore Unknown Characters; Keystroke Delay - Wasp Duraline WLS 8400 ER Series Product Reference Manual

5-10
WLS 8400 Product Reference Guide

Ignore Unknown Characters

Unknown characters are characters the host does not recognize. When Send Bar Codes
With Unknown Characters is selected, all bar code data is sent except for unknown
characters, and no error beeps sound on the scanner. When Do Not Send Bar Codes With
Unknown Characters is selected, bar code data is sent up to the first unknown character
and then an error beep sounds on the scanner.
*
Send Bar Codes with Unknown Characters
(Enable)
Do Not Send Bar Codes with Unknown Characters
(Disable)

Keystroke Delay

This is the delay in milliseconds between emulated keystrokes. Scan a bar code below to
increase the delay when hosts require a slower transmission of data.
*0 msec (No Delay)
20 msec (Medium Delay)