Scan Data Transmission Format - Wasp Duraline WLS 8400 ER Series Product Reference Manual

Scan Data Transmission Format

To change the Scan Data Transmission Format, scan the Scan Options bar code below.
Then select one of four options:
• Data As Is
• <DATA> <SUFFIX>
• <PREFIX> <DATA>
• <PREFIX> <DATA> <SUFFIX>
When a selection is made, scan the Enter bar code on page 9-8. In case of a mistake, scan
the Data Format Cancel bar code on page 9-8.
To program a carriage return/enter after each bar code scanned, scan the following bar
codes in order:
1. <SCAN OPTIONS>
2. <DATA> <SUFFIX>
3. Enter (on page 9-8)
Scan Options
*Data As Is
<DATA> <SUFFIX>
Miscellaneous Scanner Options 9-7