Rs-232 Default Parameters - Wasp Duraline WLS 8400 ER Series Product Reference Manual

RS-232 Default Parameters

Table 6-1 lists the defaults for RS-232 host parameters. To change any option, scan the
appropriate bar code(s) provided in the Parameter Descriptions section beginning on page
6-6.
See Chapter A, Standard Default Parameters for all user preferences,
hosts, symbologies, and miscellaneous default parameters.
Parameter
RS-232 Host Parameters
RS-232 Host Types
Baud Rate
Parity
Check Receive Errors
Stop Bit Select
Data Bits
Hardware Handshaking
Software Handshaking
Host Serial Response Time-out
RTS Line State
Beep on <BEL>
Intercharacter Delay
Nixdorf Beep/LED Options
Ignore Unknown Characters
Table 6-1. RS-232 Host Default Table
Default
Standard RS-232
9600
None
Enable
1 Stop Bit
8-Bit
None
None
Minimum: 2 sec
Host: Low RTS
Disable
Minimum: 0 msec
Normal Operation
Send Bar Code
RS-232 Interface 6-5
Page Number
6-9
6-11
6-13
6-13
6-14
6-14
6-16
6-18
6-20
6-21
6-22
6-23
6-24
6-25