Setting The Voltage Selector, 19" Insert; Location Of The Sensorprom Memory Unit - Siemens SITRANS F US SONOFLO Handbook

® ® ® ® ®
SITRANS F US SONOFLO
Setting the voltage
selector, 19" insert
Location of the
® ® ® ® ®
SENSORPROM memory
unit
6. Installation of the signal converter
The voltage selector is located at the back of the signal converter. Settings are 115 or 230 V a.c.
19" insert
®
The SENSORPROM unit is placed on the connection board, see figure.
For identification purposes each SENSORPROM
SONO 3000 the identification can also be read in the menu SENSOR CHARACTERISTICS. During
commissioning it should always be checked whether the pipe data settings in the menu correspond
to the values in the sensor's measuring report.
19" insert in
IP 65 housing
SFIDK.PS.029.V3.02 - 521H0553
®
unit is labelled with the sensor type. On the
31