Construction Of The Sensor; Tools Etc; Tools For Installing Transducer Holders On Steel Pipe; Tools For Installing Transducer Holders On Concrete Pipe - Siemens SITRANS F US SONOFLO Handbook

® ® ® ® ®
SITRANS F US SONOFLO

Tools etc.

Tools for installing trans-
ducer holders on steel pipe
Tools for installing trans-
ducer holders on concrete
pipe

3. Construction of the sensor

•
Length of angle iron to be used as a ruler having a length approximately corresponding to the
outer diameter of the pipe
•
Measuring tape
•
Scriber, pencil or the like
•
Pocket calculator
•
Calipers
•
Sliding gauge
•
Hammer
•
Centre punch
•
Spirit level
•
Roll of adhesive tape
• Flame cutter or drill with ø 60 mm drill bit for making holes in steel pipes
• Electric or TIG welder for welding the mounting plate and the transducer holder
•
Special drill unit for drilling ø 46 mm holes in concrete
•
Filler
A suitable filler or mortar does not shrink when setting. A comparatively short setting time is
preferred.
SFIDK.PS.029.V3.02 - 521H0553 7