Table of Contents
Advertisement
® ® ® ® ®
SITRANS F US SONOFLO
19" insert
Installation in 19" rack
Installation of the signal
converter, IP 65 version
28
6. Installation of the signal converter
The 19" insert is designed for a 19" rack system. The insert has a width of 28 TE (142 mm), a height
of 3 HE (128 mm) and a module depth of 160 mm.
The insert can be mounted directly in a 19" rack system or on a wall (IP 65 version). An optional
mounting kit for front of panel mounting or for back of panel mounting is available. The various
mounting options are illustrated on the following pages.
1. Place the SENSORPROM
2. Mount the connection board and the guide rails in the rack system as shown.
3. Connect the cables as shown in "Electrical connections".
4. Plug the signal converter into the rack system.
1. Mount the IP 65 enclosure on the wall using four screws.
2. Remove the signal converter from the IP 65 enclosure and mount the SENSORPROM
memory unit on the signal converter's connection board in the enclosure.
3. Connect the cables to the accessible terminals in the terminal box mounted separately below
the enclosure, see "Electrical connections".
4. Plug in the signal converter and close the cover.
SFIDK.PS.029.V3.02 - 521H0553
®
memory unit on the connection board of the signal converter.
®
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
