SITRANS F M MAGFLO
6.2.4
Remote installation -
Signal converter in 19"
insert
44
6. Installation of signal converter
1. Fit the SENSORPROM
converter. The SENSORPROM
2. Mount the guide rails into the rack system as shown. Distance between guide rails is 20 TE.
Guide rails are supplied with the rack system and not with the signal converter.
3. Mount the connection board as shown.
4. Connect the cables as shown under "Electrical connection", chapter 7.
5. Insert the signal converter into the rack system.
DKFD.PS.027.W3.02
®
memory unit on the connection board supplied with the signal
®
unit is supplied with the sensor in the terminal box.