Commissioning; Keypad And Display Layout; Keypad - Siemens SITRANS F US SONOFLO Handbook

® ® ® ® ®
SITRANS F US SONOFLO

Keypad and display layout

Keypad

8. Commissioning

The keypad is used to set the flowmeter. The function of the keys are as follows:
TOP UP KEY
PAGE FORWARD KEY
PAGE BACKWARD KEY
CHANGE KEY
SELECT KEY
LOCK/UNLOCK KEY
Settings are stored automatically in the signal converter and the SENSORPROM
unit. The settings remain stored in the event of power failure and when the signal converter
is replaced.
Operation of any key illuminates the display. The light automatically turns off 10 minutes after the
last key operation.
SFIDK.PS.029.V3.02 - 521H0553
This key always returns the display to the OPERATOR MENU
showing flow value.
This key is used to step forward through the menus.
This key is used to step backward through the menus.
This key changes the settings or numerical values.
This key selects the digits to be changed.
This key allows the operator to change settings and gives
access to submenus.
®
memory
35