Positioning The Paper On The Pipe - Siemens SITRANS F US SONOFLO Handbook

® ® ® ® ®
SITRANS F US SONOFLO
Positioning the paper on
the pipe
3. Construction of the sensor
Step 1
Remove any rust or dirt from the surface of the pipe.
Find the top line X - X using a spirit level. Place the spirit level on top of the pipe. When it is perfectly
balanced in horizontal position, it intersects the top line.
Mark 4 -5 points on the pipe's top line using the above method.
Draw a line X - X through the marked top points using the length of angle iron.
Step 2
Place the paper on the pipe in such a way that the line X
line X - X on the pipe.
Fix the paper to the pipe with adhesive tape.
SFIDK.PS.029.V3.02 - 521H0553
- X on the paper coincides with the top
1 2
11